A Comprehensive Guide to Replacing Your Windscreen Wipers: Tools, Tricks, and Tips to Avoid Scratching or Breaking Your Windscreen

12/10/20232 min read

black car gps turned on in car
black car gps turned on in car

Introduction

Replacing your windscreen wipers is a relatively simple task that you can easily do on your own. Not only does it save you time and money, but it also ensures clear visibility during rainy or snowy weather conditions. In this guide, we will walk you through the step-by-step process of replacing your windscreen wipers while providing valuable tips and tricks to avoid scratching or breaking your windscreen.

Tools You Will Need

Before you begin, gather the following tools:

  • Replacement windscreen wipers
  • Soft cloth
  • Windscreen cleaner
  • Small screwdriver or pliers (if necessary)

Step-by-Step Process

Step 1: Measure and Purchase the Correct Windscreen Wipers

Start by measuring the length of your current windscreen wipers to ensure you purchase the correct size. Most wipers have the size printed on the rubber blade itself. Alternatively, you can consult your vehicle's manual or check with a local auto parts store for assistance.

Step 2: Lift the Wiper Arm

Gently lift the wiper arm away from the windscreen until it locks into an upright position. This will provide you with easier access to the wiper blade.

Step 3: Remove the Old Wiper Blade

Locate the release tab or button on the wiper blade assembly. Press or slide it to detach the old wiper blade from the arm. Be cautious not to let the wiper arm snap back onto the windscreen, as it may cause damage.

Step 4: Attach the New Wiper Blade

Align the new wiper blade with the wiper arm, ensuring that the hook or clip is securely attached. You may need to apply slight pressure or use a small screwdriver or pliers to lock it into place. Follow the instructions provided with the replacement wiper blade for any specific installation steps.

Step 5: Lower the Wiper Arm

Gently lower the wiper arm back onto the windscreen, taking care to avoid any sudden movements that may scratch or crack the glass.

Step 6: Test the New Wiper Blade

Turn on your vehicle's wiper system and test the new blade for proper functionality. Ensure that it clears the windscreen smoothly and effectively.

Tips to Avoid Scratching or Breaking Your Windscreen

While replacing your windscreen wipers, keep the following tips in mind:

  • Do not force the wiper blade onto the arm. If it doesn't fit easily, double-check if you have the correct size or consult an expert.
  • Handle the wiper blade with care to prevent bending or damaging the rubber blade.
  • Use a soft cloth and windscreen cleaner to clean the windscreen before installing the new wiper blade. This helps remove any dirt or debris that may scratch the glass.
  • If you encounter any difficulties during the process, refer to your vehicle's manual or seek professional assistance.

Conclusion

By following this comprehensive guide, you can confidently replace your windscreen wipers without the fear of scratching or breaking your windscreen. Remember to gather the necessary tools, measure for the correct size, and handle the wiper blades with care. With clear visibility ensured, you'll be prepared for any weather conditions that come your way.

Location

Auckland-Wide Mobile Service

Hours

I-V 8:00-18:00
VI 8:00 - 14:00

VII Closed

Contacts

0800 762 743

sales@directautoglass.co.nz

Home